High Performance Battery Materials

Cathodes, Anodes, and Electrolytes

Lithium Titanate (LTO) Tapes

Lithium Titanate / lithium titanium oxide (Li4Ti5O12, also referred to as LTO) is an electrode material with exceptional electrochemical stability. It is often used as the anode in lithium ion batteries for applications that require high rate, long cycle life and high efficiency. LTO-based batteries are considered safer, and have a wider operating temperature rate.

NEI’s NANOMYTE® BE-10E is a cast electrode tape of our ultrafine LTO & BE-10CE is a cast electrode tape of our carbon-coated LTO, capable of high rates. Our standard anode tapes are cast on 5 inch x 10 inch sheets of copper foil, single-side coated with a 90% active material loading (~2 mAh/cm2 capacity). Our tapes can also be customized to accommodate different active material loadings, coating thickness, binder type (aqueous/non-aqueous), and binder content, as well as choice of current collector. *If ordered with a cathode, loading will be matched with an anode/cathode capacity ratio of 1.2 (unless specified otherwise)*

Both of our LTO materials are also available in powder form.

NANOMYTE® BE-10E Spec Summary:

  • Li4Ti5O12 powder cast on copper sheets
  • Sheet Size: 5 in x 10 in (12.7 cm x 25.4 cm)
  • Active Material Loading: 90%
  • Standard Capacity: 2 mAh/cm2 ± 5%
  • Nominal voltage vs. Li/Li+: 1.53V
  • Nominal capacity at 0.1C: ≥ 170 mAh/g

NANOMYTE® BE-10CE Spec Summary:

  • Li4Ti5O12 powder coated with 1-3 wt% carbon cast on copper sheets
  • Sheet Size: 5 in x 10 in (12.7 cm x 25.4 cm)
  • Active Material Loading: 90%
  • Standard Capacity: 2 mAh/cm2 ± 5%
  • Nominal voltage vs. Li/Li+: 1.53V
  • Nominal capacity at 0.1C: ≥ 170 mAh/g

Available for Purchase

NEI’s standard electrode sheets are now offered at a *new lower price* and available in ready-to-ship packages of 2, 5, and 10 sheets (per material).

All of our standard electrode sheets are cast on 5 inch x 10 inch sheets of aluminum (cathode) or copper foil (anode), single-side coated with a 90% active material loading (~2 mAh/cmcapacity). NEI can also customize tape specifications (such as loading, thickness, binder, & collector) for an additional fee. Request your quote today!

Technical Information

Battery Specification Sheets

Safety Data Sheets (SDS)

Questions? Contact a Battery Expert