High Performance Battery Materials

Cathodes, Anodes, and Electrolytes

Lithium Nickel Cobalt Aluminum Oxide (NCA) Tape

Cathode Electrode Sheets

Lithium nickel cobalt aluminum oxide (LiNi0.8Co0.15Al0.05O2) is a cathode material that provides higher capacity than LiCoO2 when both are charged to 4.2 / 4.3V. NCA-based batteries are most suited for use in moderate rate applications that require high energy density.

NANOMYTE® BE-45E is a cast electrode tape of NCA powder. Standard electrode sheets are 5 inches x 10 inches (127 mm x 254 mm) and cast either single-sided or double-sided on 16 µm thick aluminum foil current collectors. NEI also offers custom tailored solutions for customers with unique specification requirements. Our tapes can also be customized to accommodate different active material loadings, coating thickness, binder type (aqueous/non-aqueous), and binder content, as well as choice of current collector.

NEI’s Lithium Nickel Cobalt Aluminum Oxide is also available in powder form.

Electrode Sheets Brochure

NANOMYTE® BE-45E Spec Summary:

  • Active Material: LiNi0.8Co0.15Al0.05O2
  • Current Collector: Aluminum (16 µm thick)
  • Tape Composition: 90% active material, 5% PVDF binder, 5% Super P
  • Sheet Size: 5 in x 10 in (127 mm x 254 mm)
  • Coating: Single or Double-sided sheets (as specified)
  • Areal Capacity: 2.0 mAh/cm2 ± 5% (per side)
  • Active Material Loading: 10.5 mg/cm2 ± 5% (per side)
  • Tape Thickness: 60 µm ± 5% (excluding current collector)
  • Nominal voltage vs. Li/Li+: 3.7V
  • Minimum capacity: 170 mAh/g
  • Experimental capacity: ≥ 190 mAh/g (3 – 4.2V @ 0.1C)

Available for Purchase

NEI’s standard* electrode sheets are available in ready-to-ship packages of 2, 5, and 10 sheets (per material). Bulk quantities are also available. Request a quote today!

*Standard electrode sheets are as specified on the spec sheet. Modifications in tape specifications (such as loading, thickness, binder, & collector) can be made for an additional fee.