High Performance Battery Materials

Cathodes, Anodes, and Electrolytes

Lithium Iron Phosphate (LFP) Tapes

Cathode Electrode Sheets

Lithium Iron Phosphate (LiFePO4) is the representative material for olivine structured cathode materials. Its specific capacity (~170 mAh/g) is higher than that of the related lithium cobalt oxide (~140 mAh/g), however its energy density is slightly lower due to its low operating voltage. Because of its low-cost, low-toxicity, long-term stability, and well-defined performance, LFP-based batteries are finding a number of roles in vehicle use and backup power applications.

NANOMYTE® BE-60E is a cast electrode tape of LFP powder. NEI’s standard cathode tapes are cast on 5 inch x 10 inch sheets of aluminum foil, single-side coated with a 90% active material loading. Our tapes can also be customized to accommodate different active material loadings, coating thickness, binder type (aqueous/non-aqueous), and binder content, as well as choice of current collector.

Electrode Sheets Brochure

NANOMYTE® BE-60E Spec Summary:

  • LiFePO4 powder cast on aluminum sheets
  • Sheet Size: 5 in x 10 in (12.7 cm x 25.4 cm)
  • Active Material Loading: 90%
  • Standard Capacity: 1.25 mAh/cm2 ± 5%
  • Nominal Voltage vs. Li/Li+: 3.2V
  • Nominal Capacity at 0.1C: ≥ 160 mAh/g

Available for Purchase

NEI’s standard* electrode sheets are available in ready-to-ship packages of 2, 5, and 10 sheets (per material). Request a quote today!

*Standard electrode sheets are cast on 5 inch x 10 inch sheets of aluminum (cathode) or copper foil (anode), single-side coated with a 90% active material loading. Modifications in tape specifications (such as loading, thickness, binder, & collector) can be made for an additional fee.